Close   
ASM+QBM
ASM+QBM Multi-tone alarm sounder and LED multi strobe beacon

Visual equipment

Contact sales
Download 3D model

ASM+QBM Multi-tone alarm sounder and LED multi strobe beacon

  • Combination of 132 mm cubic-design multi-tone sounder and LED multi-strobe beacon
  • Beacon with very good frontal/lateral signalling effect
  • High degree of protection IP 66
  • 32 tones can be selected, 3 tones can be switched externally
  • Max. 113 dB (A) sound pressure, infinitely adjustable
  • 4 different strobe patterns, can be switched externally
  • For industrial and general applications

Technical data – visual equipment

Housing132 mm (square), Polycarbonate red (RAL 3000)
LensPolycarbonate, ribbed inside amber, red, clear, blue, green or yellow
Type of mountinghorizontal, vertical or any
Cable entryBack: Grommet 5–10 mm, optional side cable entry with cable gland (on both sides) (accessory type AKV)
Connection technologyScrew/plug-in terminal 2,5 mm²
Leakage current0,003 A
Beacon typeLED steady beacon, LED flashing beacon or LED multi strobe beacon
Light sourceHigh Power LEDs
Duty cycle100 %
Service lifeLight source: >50.000 h
Operating temperature-30 °C / +60 °C
Degree of protectionIP66 & UL Type 4/4x/13
Impact resistanceIK09
Weight550 g

Technical data – audible equipment

HousingPolycarbonate
Type of mountinghorizontal, vertical or any, Sound outlet opening at bottom or horizontal
Cable entryBack: Grommet 5–10 mm Side: AKV cable gland M20 x 1.5 7–14 mm can be mounted
Connection technologyScrew/plug-in terminal up to 2,5 mm²
Leakage current0,003 A
Tone32 Tones, 3 Tones can be switched externally, see tone table
Volume113 dB (can be adjusted with potentiometer)
Tone frequency150-2.900 Hz
Duty cycle100 %
Operating temperature-30 °C / +60 °C
Degree of protectionIP66 & UL Type 4/4x/13
Impact resistanceIK09
Weight600 g

Visual equipment

TypeLens colourNominal voltageVoltage range (V)Nominal current (A)Order no.
QBMamber24-48 V AC/DC19-60 V AC
18-85 V DC
1,300 874271408Save to watchlist
QBMamber110-240 V AC/DC80-2650,300 874271313Save to watchlist
QBMblue24-48 V AC/DC19-53 V AC
18-60 V DC
0,520 874275408Save to watchlist
QBMblue110-240 V AC90-2650,120 874275313Save to watchlist
QBMclear24-48 V AC/DC19-53 V AC
18-60 V DC
0,520 874274408Save to watchlist
QBMclear110-240 V AC90-2650,120 874274313Save to watchlist
QBMgreen24-48 V AC/DC19-53 V AC
18-60 V DC
0,520 874276408Save to watchlist
QBMgreen110-240 V AC90-2650,120 874276313Save to watchlist
QBMred24-48 V AC/DC19-60 V AC
18-85 V DC
1,300 874272408Save to watchlist
QBMred110-240 V AC/DC80-2650,300 874272313Save to watchlist
QBMyellow24-48 V AC/DC19-60 V AC
18-85 V DC
1,300 874277408Save to watchlist
QBMyellow110-240 V AC/DC80-2650,300 874277313Save to watchlist

Audible equipment

TypeNominal voltageVoltage range (V)Nominal current (A)Mains frequencyOrder no.
ASM24-48 V AC/DC21-53 V AC
21-60 V DC
0,230 50-60 Hz874270408Save to watchlist
ASM110-240 V AC95-2650,070 50-60 Hz874270313Save to watchlist

Accessories

TypeType of accessoryWeightOrder no.
 Screw set for use with A/Q series size 1 and 2 - ASKASK Screw set for use with A/Q series size 1 and 22 g874045900Save to watchlist
Adjustment pin for built-in buzzer  - PINPINAdjustment pin for built-in buzzer 1 g813909405Save to watchlist
Mounting set for combining several pieces of signalling equipment of the same size - AMKAMKMounting set for combining several pieces of signalling equipment of the same size10 g874010900Save to watchlist
Flat seal for correct IP66 installation on smooth surfaces - AG2AG2Flat seal for correct IP66 installation on smooth surfaces40 g874022900Save to watchlist
Cable gland M20x1,5 - AKVAKVCable gland M20x1,514 g698800026Save to watchlist
You can change your settings and withdraw your consent at any time. The lawfulness of the processing carried out on the basis of the consent up to the revocation is not affected by this.