Close   
ASL+QBL
ASL+QBL Multi-tone alarm sounder and LED multi strobe beacon

Visual equipment

Contact sales
Download 3D model

ASL+QBL Multi-tone alarm sounder and LED multi strobe beacon

  • Combination of 184 mm cubic-design multi-tone sounder and LED multi-strobe beacon
  • Beacon with very good frontal/lateral signalling effect
  • High degree of protection IP 66
  • UV-stabilised material
  • Max. 120 dB (A) sound pressure, infinitely adjustable
  • 63 tones can be selected, 3 tones can be switched externally
  • 3 different strobe patterns, can be switched externally
  • For industrial and general applications

Technical data – visual equipment

Housing184 mm (square), Polycarbonate
LensPolycarbonate, ribbed inside amber, red, clear, blue, green or yellow
Type of mountinghorizontal, vertical or any
Cable entryBack: Grommet 5–10 mm, optional side cable entry with cable gland (on both sides) (accessory type AKV)
Connection technologyScrew/plug-in terminal 2,5 mm²
Leakage current0,003 A
Beacon typeLED multi strobe beacon
Light source6 High Power LEDs
Luminous intensity250 Cd
Strobe/flash frequencyDouble strobe 1.4 Hz; 6x strobe 1.0 Hz; multi strobe
Duty cycle100 %
Service lifeLight source: >50.000 h
Operating temperature-30 °C / +60 °C
Degree of protectionIP66 & UL Type 4/4x/13
Impact resistanceIK09
Weight1,7 kg

Technical data – audible equipment

HousingPolycarbonate
Type of mountinghorizontal, vertical or any, Sound outlet opening at bottom or horizontal
Cable entryBack: Grommet 5–10 mm Side: AKV cable gland M20 x 1.5 7–14 mm can be mounted
Connection technologyScrew/plug-in terminal up to 2,5 mm²
Leakage current0,003 A
Tone63 Tones, 3 Tones can be switched externally, see tone table
Volume120 dB (can be adjusted with potentiometer)
Tone frequency150-3.100 Hz
Duty cycle100 %
Operating temperature-30 °C / +60 °C
Degree of protectionIP66
Impact resistanceIK09
Weight2,2 kg

Visual equipment

TypeLens colourNominal voltageVoltage range (V)Nominal current (A)Order no.
QBLamber24-48 V AC/DC18-53 V AC
18-60 V DC
0,810 874761408Save to watchlist
QBLamber110-240 V AC/DC80-2650,220 874761413Save to watchlist
QBLblue24-48 V AC/DC18-53 V AC
18-60 V DC
0,810 874765408Save to watchlist
QBLblue110-240 V AC/DC80-2650,220 874765413Save to watchlist
QBLclear24-48 V AC/DC18-53 V AC
18-60 V DC
0,810 874764408Save to watchlist
QBLclear110-240 V AC/DC80-2650,220 874764413Save to watchlist
QBLgreen24-48 V AC/DC18-53 V AC
18-60 V DC
0,810 874766408Save to watchlist
QBLgreen110-240 V AC/DC80-2650,220 874766413Save to watchlist
QBLred24-48 V AC/DC18-53 V AC
18-60 V DC
0,810 874762408Save to watchlist
QBLred110-240 V AC/DC80-2650,220 874762413Save to watchlist
QBLyellow24-48 V AC/DC18-53 V AC
18-60 V DC
0,810 874767408Save to watchlist
QBLyellow110-240 V AC/DC80-2650,220 874767413Save to watchlist

Audible equipment

TypeNominal voltageVoltage range (V)Nominal current (A)Mains frequencyOrder no.
ASL24-48 V AC/DC21-53 V AC
21-60 V DC
1,200
0,900
50-60 Hz874360408Save to watchlist
ASL110-120 V AC+/- 10 %0,200 50-60 Hz874360310Save to watchlist
ASL230-240 V AC+/- 10 %0,100 50-60 Hz874360313Save to watchlist

Accessories

TypeType of accessoryWeightOrder no.
Adjustment pin for built-in buzzer  - PINPINAdjustment pin for built-in buzzer 1 g813909405Save to watchlist
Mounting set for combining several pieces of signalling equipment of the same size - AMKAMKMounting set for combining several pieces of signalling equipment of the same size10 g874010900Save to watchlist
Flat seal for correct IP66 installation on smooth surfaces - AG3AG3Flat seal for correct IP66 installation on smooth surfaces67 g874023900Save to watchlist
Cable gland M20x1,5 - AKVAKVCable gland M20x1,514 g698800026Save to watchlist
You can change your settings and withdraw your consent at any time. The lawfulness of the processing carried out on the basis of the consent up to the revocation is not affected by this.