Close   
ASM+QDM
ASM+QDM Multi-tone alarm sounder and LED steady/flashing beacon

Visual equipment

Contact sales
Download 3D model

ASM+QDM Multi-tone alarm sounder and LED steady/flashing beacon

  • Combination of 132mm cubic-design multi-tone alarm sounder and LED steady/flashing beacon
  • Beacon with good frontal/lateral signalling effect
  • High degree of protection IP 66
  • UV-stabilised material
  • 32 tones can be selected, 3 tones can be switched externally
  • Max. 113 dB (A) sound pressure, infinitely adjustable
  • Types of light can be switched externally
  • For industrial and general applications

Technical data – visual equipment

Housing132 mm (square), Polycarbonate
LensPolycarbonate, ribbed inside amber, red, clear, blue, green or yellow
Type of mountinghorizontal, vertical or any
Cable entryBack: Grommet 5–10 mm, optional side cable entry with cable gland (on both sides) (accessory type AKV)
Connection technologyScrew/plug-in terminal 2,5 mm²
Leakage current0,003 A
Beacon typeLED steady beacon or LED flashing beacon
Light source4 High Power LEDs
Luminous intensity78 Cd
Strobe/flash frequency2 Hz
Duty cycle100 %
Service lifeLight source: >50.000 h
Operating temperature-30 °C / +60 °C
Degree of protectionIP66 & UL Type 4/4x/13
Impact resistanceIK09
Weight500 g

Technical data – audible equipment

HousingPolycarbonate
Type of mountinghorizontal, vertical or any, Sound outlet opening at bottom or horizontal
Cable entryBack: Grommet 5–10 mm Side: AKV cable gland M20 x 1.5 7–14 mm can be mounted
Connection technologyScrew/plug-in terminal up to 2,5 mm²
Leakage current0,003 A
Tone32 Tones, 3 Tones can be switched externally, see tone table
Volume113 dB (can be adjusted with potentiometer)
Tone frequency150-2.900 Hz
Duty cycle100 %
Operating temperature-30 °C / +60 °C
Degree of protectionIP66 & UL Type 4/4x/13
Impact resistanceIK09
Weight600 g

Visual equipment

TypeLens colourNominal voltageVoltage range (V)Nominal current (A)Order no.
QDMamber24-48 V AC/DC18-53 V AC
18-60 V DC
0,680 874261408Save to watchlist
QDMamber110-240 V AC/DC90-2650,160 874261413Save to watchlist
QDMblue24-48 V AC/DC18-53 V AC
18-60 V DC
0,680 874265408Save to watchlist
QDMblue110-240 V AC/DC90-2650,160 874265413Save to watchlist
QDMclear24-48 V AC/DC18-53 V AC
18-60 V DC
0,680 874264408Save to watchlist
QDMclear110-240 V AC/DC90-2650,160 874264413Save to watchlist
QDMgreen24-48 V AC/DC18-53 V AC
18-60 V DC
0,680 874266408Save to watchlist
QDMgreen110-240 V AC/DC90-2650,160 874266413Save to watchlist
QDMred24-48 V AC/DC18-53 V AC
18-60 V DC
0,680 874262408Save to watchlist
QDMred110-240 V AC/DC90-2650,160 874262413Save to watchlist
QDMyellow24-48 V AC/DC18-53 V AC
18-60 V DC
0,680 874267408Save to watchlist
QDMyellow110-240 V AC/DC90-2650,160 874267413Save to watchlist

Audible equipment

TypeNominal voltageVoltage range (V)Nominal current (A)Mains frequencyOrder no.
ASM24-48 V AC/DC21-53 V AC
21-60 V DC
0,230 50-60 Hz874270408Save to watchlist
ASM110-240 V AC95-2650,070 50-60 Hz874270313Save to watchlist

Accessories

TypeType of accessoryWeightOrder no.
 Screw set for use with A/Q series size 1 and 2 - ASKASK Screw set for use with A/Q series size 1 and 22 g874045900Save to watchlist
Adjustment pin for built-in buzzer  - PINPINAdjustment pin for built-in buzzer 1 g813909405Save to watchlist
Mounting set for combining several pieces of signalling equipment of the same size - AMKAMKMounting set for combining several pieces of signalling equipment of the same size10 g874010900Save to watchlist
Flat seal for correct IP66 installation on smooth surfaces - AG2AG2Flat seal for correct IP66 installation on smooth surfaces40 g874022900Save to watchlist
Cable gland M20x1,5 - AKVAKVCable gland M20x1,514 g698800026Save to watchlist
You can change your settings and withdraw your consent at any time. The lawfulness of the processing carried out on the basis of the consent up to the revocation is not affected by this.