()
QDM
QDM LED steady/flashing beacon
- 132 mm cubic-design LED steady/flashing beacon
- Good frontal and lateral signalling effect
- up to 78 cd luminous intensity
- High degree of protection IP 66 & impact resistance IK09
- UV-stabilised material
- Modern LED technology – 4 high-power LEDs
- Steady and flashing light, can be switched externally
- For industrial and general applications
- Combinations of beacons and multi-tone alarm sounders possible
Technical data
| Housing | 132 mm (square), Polycarbonate, UV stabilized |
| Lens | Polycarbonate, ribbed inside |
| Type of mounting | horizontal, vertical or any |
| Cable entry | Back: Grommet 5–10 mm, optional side cable entry with cable gland (on both sides) (accessory type AKV) |
| Connection technology | Screw/plug-in terminal 2,5 mm² |
| Leakage current | 0,003 A |
| Beacon type | LED steady beacon or LED flashing beacon |
| Light source | 4 High Power LEDs |
| Luminous intensity | 78 Cd |
| Strobe/flash frequency | 2 Hz |
| Duty cycle | 100 % |
| Service life | Light source: >50.000 h |
| Operating temperature | -30 °C / +60 °C |
| Product standard | EN60947-5-1:2004 + A1:2009 |
| Degree of protection | IP66 & UL Type 4/4x/13 |
| Impact resistance | IK09 |
| Weight | 500 g |
Accessories
| Type | Type of accessory | Weight | Part no. | |
|---|---|---|---|---|
 | ASK | Screw set for use with A/Q series size 1 and 2 | 2 g | 874045900 |
 | AMK | Mounting set for combining several pieces of signalling equipment of the same size | 10 g | 874010900 |
 | AB2 | Mounting set for metal bracket for mounting in any direction (e.g. on mounting platforms) | 220 g | 874032900 |
 | AG2 | Flat seal for correct IP66 installation on smooth surfaces | 40 g | 874022900 |
 | AKV | Cable gland M20x1,5 | 14 g | 698800026 |